oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2010 oscilent controlled document ordering code / part number product description 803-rf325.3m-a wireless, rf saw filter specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency performance notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 803-rf325.3m-a january 2010 rev a wireless, rf saw filter product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit \ source and load impedance: 50 ? pin description a, c, d, f ground b in e out
oscilent part number 803-rf325.3m-a january 2010 rev a wireless, rf saw filter product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -30 - +65 storage temperature range c -40 - +85 maximum dc voltage v - - 10 maximum input power dbm - - 0 source impedance (single ended) (1) ? - 150 - load impedance (single ended) (1) ? - 150 - notes: no matching network (ref. testi ng environment circui t as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 325.3 - insertion loss within 322.0 ~ 328.6 mhz db - 2.5 3.5 amplitude ripple within 322.0 ~ 328.6 mhz db p-p - 0.8 1.5 attenuation: fo-100.0 ~ fo-39.5 mhz db 40 50 - fo+39.5 ~ fo+100.0 mhz db 50 60 -
oscilent part number 803-rf325.3m-a january 2010 rev a wireless, rf saw filter product specification p. 3 www.oscilent.com frequency performance
|